Image Freeze; Text Overlay - RGBlink VSP268S Quick Start Manual

Table of Contents

Image Freeze

Touch < Freeze> button in front panel of

output image is freezed, Re-touch <Freeze> button, the light is off, the freeze feature is cancelled and video

image restored, the LCD shows <Video Image>.

The OSD feature is to add subtitle in the output image which is widely used in live broadcast, concert, live talk

show and ad.

First, before setting OSD, user should confirm the subtitle input channel, for example, VGA is the input channel

for subtitle, make sure to add the OSD in designated channel like DVI in advance, the setting is as follows:

1. Touch VGA button to check the input signal, the LCD shows the VGA signal in normal;.

2. Re-touch DVI buton to check the input signal, the LCD shows the DVI signal in normal;

3. Open PIP, make sure VGA is the sub-image, DVI is the main image, if it is on the contrary. select "Swap

Window" under the PIP menu to swap the image;

4. Select "B image" from the "Selection" under <PIP> menu, touch "Scaling" button to set the size and position,

move the VGA image to the designated position;

When the VGA image postion and size setting is done, make sure the VGA image is over DVI and keeps in

normal, if VGA input shows black lines, user can use "Crop" feature under the "Input" menu to adjust the black

lines;

5. Touch [Menu], rotate the knob, select <Output> and rotate knob to confirm;

Rotate the knob, select <Text Overlay>, touch the knob to confirm, enter the text overlay menu, rotate the knob,

select <Text Overlay>, touch the knob to confirm, rotate the knob, select "On", touch the knob and open the DSK

feature;

Rotate the knob, select <Pre-set Mode>, touch knob and enter to the menu, select VGA subtitle input way, for

example, VGA subtitle is white on black, select "White on black 1" or "Black on White 2"(Note:the DSK is only

for single color subtitle);

6. Touch [Save[ button to save all the settings, user can load the setting next time instead of re-set.

Address：S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

VSP

268S, the LCD shows <Image Freeze> and the light is on, the

Tel: 00865925771197

Email: sales@rgblink.com

Fax: 00865925788216

http://www.rgblink.cn

Table of Contents