Text Overlay Setting; User Define The Black Key - RGBlink VENUS X1 Quick Start Manual

Text Overlay Setting

Before setting the text overlay, please make sure the input channel of the text. For example, set VGA input as
the text channel. Then make sure the channel that the text will overlay, for example, overlay the text on DVI
channel. The operations are as follows:
1. Push the VGA button to make sure there is VGA input.
2. Push the DVI button to make sure there is DVI input.
3. Push the [MENU] button, turn the rotary knob, select <PICTURE>, push the knob to confirm, turn the rotary
knob, and select <TEXT OVERLAY>, push the knob to confirm.
Then enter into TEXT OVERLAY menu items, turn the rotary knob, and select <TEXT OVERLAY>, push the knob
to confirm, turn the rotary knob again, and select "ON" to enable the text overlay function.
4. Make sure VGA input is IMAGE B, and DVI input is IMAGE A, if not, select <SWAP WINDOW> option by
pushing [PIP] button, and select "ON" for <SWAP WINDOW>.
5. Select the VGA image in "IMAGE B" in <SELECT> option by pushing <PIP> button, and push [SCALE] button to
adjust the size and position of VGA image, then set the VGA image to the required position.
The standard position and size is: ensure the VGA image overlay on the DVI image, display normally and
without black edges. If there are black edges around VGA image, select <ZOOM> option in <INPUT> to adjust.
6. Set the text overlay mode: select <PRESET> option in <TEXT OVERLAY>, push the knob to enter into the
<PRESET> menu items. Turn the rotary knob to select the preset mode, for example, set the VGA text as
WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only support monochrome subtitles), user can
also adjust the <BLEND MODE> or <BLEND LEVEL> to get a better effect.
7. Push the [SAVE/1] button to save the above parameters.

User Define the BLACK Key

System default the [BLACK] button as black function. Push the button, its LED light turns on, the output
will be switched to black, push the button again, its LED light is off, and output the video image.
For more details, please refer to:
Besides BLACK, user can define this button as FREEZE, TEST PATTERN and BRIGHTNESS, the operations are as
follows:
1. Push the [MENU] button to enter to the menu items, turn the rotary knob, and select <SYSTEM>.
2. Push the knob to confirm, turn the rotary knob, and select <USER DEFINED BUTTON>.
3. Push the knob to confirm, turn the rotary knob, and select <BLACK KEY>.
4. Push the knob to confirm, turn the rotary knob, and select <FREEZE>, <TEST PATTERN> or <BRIGHTNESS>,
push the knob to confirm.
(1) If select <FREEZE>, push the button, its LED light turns on, and freeze the image. Push the button again, its
LED light is off, and output the video image.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Using Black Out.
21
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn