Save Preset - RGBlink GX4 Quick Start Manual

Save Preset

GX4 provides 16 positions for saving or recording parameters. To save current parameters and settings:
1. Push the [SAVE/1] button, the button light is on, and enable the SAVE function.
2. Turn the rotary knob, and select the position that will save, push the knob to confirm.
3. The number button 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1~10, push any button on to save. For example, push
number button 2 and save to SAVE 2, the OLED panel will show as follows after saving.
4. Push the [SAVE/1] button again, the button light is off, and disable the SAVE function.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
SAVE TO
->SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
->SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite
support@rgblink.com | www.rgblink.com
14 / 20