Cabin Model - wsm M8540NARROW Workshop Manual

M8540Narrow, M9540Narrow, WSM

(3) CABIN Model

Rear Wheel (Wheel Model)
1. Set the disassembling stand under the transmission case
secure.
2. Remove the both rear wheels (1).
(When reassembling)
Tightening torque Rear wheel mounting nut
(1) Rear Wheel
Removing Compressor and Condenser
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Heater Hose, Accelerator Wire, Bonnet Support and Steering
Joint Shaft
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Floor Mat and Panel Cover
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Brake Rod (Parking)
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Removing Control Rods and Brake Hoses
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Auxiliary Control Valve Cable and Ground Cable
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Brake Rod (L.H.), Shuttle Cable and Clutch Cable
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
Cabin Assembly
1. Refer to "[2] DISASSEMBLING AND ASSEMBLING" at "N10.
CABIN" section.
N2-S10
CLUTCH
260 to 304 N·m
26.5 to 31.0 kgf·m
191.8 to 224.2 lbf·ft
9Y1210236CLS0020US0
9Y1210236CLS0021US0
9Y1210236CLS0022US0
9Y1210236CLS0023US0
9Y1210236CLS0024US0
9Y1210236CLS0025US0
9Y1210236CLS0026US0
9Y1210236CLS0027US0
9Y1210236CLS0028US0
KiSC issued 07, 2013 A