Preparation For Separating Each Block; External Parts - wsm M8540NARROW Workshop Manual

M8540Narrow, M9540Narrow, WSM

[2] PREPARATION FOR SEPARATING EACH BLOCK

(1) External Parts

Bonnet [ROPS Model]
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (2) for head lights.
3. Disconnect the damper (3) and (4).
4. Remove the bonnet (1).
(When reassembling)
• Be sure to assemble the damper (3) and (4) to the original
position and direction.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
(1) Bonnet
(2) Connector
Bonnet [CABIN Model]
1. Open the bonnet (1) and disconnect the battery negative
terminal (2).
2. Disconnect the connector (4) for head lights.
3. Disconnect the dampers (3).
4. Remove the bonnet (1).
(When reassembling)
• Be sure to assemble the dampers (3) to the original direction.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
(1) Bonnet
(2) Battery Negative Terminal
Ground PTO Rod
1. Remove the ground PTO rod (1) and spring.
(When reassembling)
• Be sure to assemble the ground PTO rod (1) to the hole (b).
(1) Ground PTO Rod
(2) Spring
N3-S9
TRANSMISSION
(3) Damper (Shorter)
(4) Damper (Longer)
9Y1210236TRS0009US0
(3) Damper
(4) Connector
9Y1210236TRS0010US0
(a) Hole to CABIN Model
(b) Hole to ROPS Model
9Y1210236TRS0065US0
KiSC issued 07, 2013 A