wsm M8540NARROW Workshop Manual page 151

M8540Narrow, M9540Narrow, WSM
Backlash between Differential Pinion and Differential Side
Gear
1. Set a dial indicator (lever type) on the tooth of the differential
pinion.
2. Hold the differential side gear and move the differential pinion to
measure the backlash.
3. If the measurement is not within the factory specifications,
adjust with the differential side gear washer.
Factory specification
Backlash between
differential pinion and
differential side gear
Allowable limit
(Reference)
• Thickness of differential side gear washer :
1.5 mm (0.059 in.)
1.6 mm (0.063 in.)
1.7 mm (0.067 in.)
1.8 mm (0.071 in.)
2.0 mm (0.078 in.)
(1) Side Gear Washer
Clearance of Differential Lock Shifter
1. Measure the clearance "L" between differential lock shifter and
differential case when the differential lock pedal OFF position.
2. If the measurement is not within the factory specifications,
adjust with adjusting shim (2).
Clearance "L" Factory specification
(Reference)
• Thickness of adjusting shim :
0.5 mm (0.020 in.)
1.0 mm (0.039 in.)
(1) Plug
(2) Adjusting Shim (0.5 mm, 0.0197 in.)
N3-S43
TRANSMISSION
0.15 to 0.30 mm
0.0059 to 0.0118 in.
0.4 mm
0.016 in.
9Y1210236TRS0063US0
6.0 to 8.0 mm
0.236 to 0.315 in.
(3) Shift Fork
9Y1210236TRS0064US0
KiSC issued 07, 2013 A