Solenoid Valve - wsm M8540NARROW Workshop Manual

M8540Narrow, M9540Narrow, WSM

[5] SOLENOID VALVE

Solenoid Valves
1) Connector Voltage
1. Remove the connector (2).
2. Set the 4WD/Bi-speed turn switch to bi-speed position.
3. Measure the voltage across the terminal 4 and chassis.
4. If the voltage differs from battery voltage, the wiring harness,
fuse or main switch is faulty.
Voltage Terminal 4 – Chassis
2) Solenoid Valve
1. Disconnect the wire harness connector (2).
2. Measure the resistance with an ohmmeter across the each
terminal 4 on the connector (2) and chassis.
3. If infinity is indicated, the solenoid valve is faulty.
Solenoid valve 4 terminal to
Resistance
chassis
(1) Solenoid Valve Assembly
(2) Connector
(3) Terminal 4 for Bi-speed Turn
Solenoid Valve
N9-S18
ELECTRICAL SYSTEM
Approx. battery voltage
10 to 12 Ω
(4) PTO Solenoid Valve
(5) Bi-speed Turn Solenoid Valve
(6) 4WD Solenoid Valve
9Y1210236ELS0025US0
KiSC issued 07, 2013 A