General Troubleshooting; Printer Does Not Power On; This Section Includes: Printer Does Not Power On - Xerox WorkCentre 6515 User Manual

Troubleshooting

General Troubleshooting

This section includes:
• Printer Does Not Power On ............................................................................................................................................. 192
• Printer Resets or Powers Off Frequently .................................................................................................................... 193
• Printer Does Not Print ........................................................................................................................................................ 193
• Printing Takes Too Long ................................................................................................................................................... 194
• Document Prints From Wrong Tray ............................................................................................................................ 195
• Automatic 2-Sided Printing Problems ........................................................................................................................ 195
• Printer is Making Unusual Noises ................................................................................................................................. 195
• Paper Tray Will Not Close ................................................................................................................................................ 195
• Condensation has Formed Inside the Printer ......................................................................................................... 196
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.

Printer Does Not Power On

Probable Causes
The power switch is not turned on.
The power cord is not plugged into the outlet
correctly.
Something is wrong with the outlet
connected to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
CAUTION: Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
192 Xerox WorkCentre
®
User Guide
Solutions
At the printer control panel, press the Power/Wake button.
For details, refer to
Power off the printer, and plug the power cord securely into the
outlet.
• Plug another electrical appliance into the outlet and check if it
operates properly.
• Try a different outlet.
Use a power source with the specifications listed in the
Specifications
6515 Color Multifunction Printer
®
Turning the Printer On and Off
on page 304.
on page 52.
Electrical