Xerox WorkCentre 6515 User Manual page 88

Paper and Media
Loading Labels in the Bypass Tray
1. Remove all paper from the tray.
2. Load Labels in the bypass tray, face up, with the top edge of the page feeding into the printer first.
3. Adjust the width guides until they touch the edges of the paper.
4. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper type and size.
a. If the paper size and type are correct, touch OK.
b. If the paper size or type are incorrect, change the settings.
• To select a sheet size, touch the current size setting, then from the list, select the size.
• To select a paper type, touch the current paper type, then from the list, select the type.
To save the settings, touch OK.
•
5. If no prompt appears when paper is loaded, set the paper type and size.
At the printer control panel, press the Home button.
a.
b. Touch Device > Paper Trays.
c. To open the Bypass Tray menu, touch the Bypass Tray icon. It is displayed in the top position,
before the numbered trays.
d. To select a paper or envelope size, touch the current size setting, then from the list, select a size.
e. To select a paper type, touch the current paper type, then from the list, select a paper type.
f. To save the setting, touch OK.
To return to the Home screen, press the Home button.
6.
88 Xerox WorkCentre
®
User Guide
6515 Color Multifunction Printer
®