Xerox WorkCentre 6515 User Manual page 211

Label and Envelope Misfeeds
Probable Causes
The label sheet is facing the wrong way in
the tray.
Labels are missing, curled, or pulled away
from the backing sheet.
Envelopes are loaded incorrectly.
Envelopes are wrinkling.
Paper Jam Message Stays On
Probable Causes
Some paper remains jammed in the printer.
One of the printer doors is open.
Note: Check for, and remove, torn pieces of paper in the paper path.
Jams During Automatic 2-Sided Printing
Probable Causes
Using paper of the wrong size, thickness, or
type.
Paper is loaded in the wrong tray.
Tray is loaded with mixed paper.
Solutions
• Load label sheets according to the instructions from the
manufacturer.
• Load labels in the tray, face up.
For details, refer to Labels
Do not use any sheet where labels are missing, curled, or pulled
away from the backing sheet.
You can print envelopes from the Bypass tray or Tray 1.
For details, refer to Envelopes
• The heat and pressure of the laser printing process can cause
wrinkling.
• Use supported envelopes. For details, refer to
Printing Envelopes on page 81.
Note: When you load envelopes long-edge feed, ensure that you
specify landscape orientation in the print driver.
Solutions
Recheck the media path and make sure that you have removed all
of the jammed paper.
Check the doors on the printer. Close any door that is open.
Solutions
Use paper of the correct size, thickness, or type. For details, refer to
Supported Paper Sizes for Automatic 2-Sided Printing
Ensure that paper is loaded into the correct tray. For details, refer to
Supported Paper on page 68.
Load the tray with only one type and size of paper.
Xerox WorkCentre
® ®
on page 87.
on page 81.
Guidelines for
6515 Color Multifunction Printer
User Guide
Troubleshooting
on page 71.
211