Selecting A Location For The Printer; Opening The Output Tray Extension - Xerox WorkCentre 6515 User Manual

Selecting a Location for the Printer

1. Select a dust-free area with temperatures from 5–32°C (41–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, refer to
with adequate clearance to access supplies and to provide proper ventilation. To find the clearance
requirements for your printer, refer to
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.

Opening the Output Tray Extension

1. To provide better support for your prints, open the Output Tray Extension.
2. To print on longer paper, open the Output Tray Extension, then pull out the upper section until it
stops.
Physical Specifications
Clearance Requirements
Xerox WorkCentre
®
Installation and Setup
on page 300. Select a location
on page 301.
6515 Color Multifunction Printer
®
User Guide
39