Adding The Printer - Xerox WorkCentre 6515 User Manual

Adding the Printer

For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
1. From the computer Applications folder or from the dock, open System Preferences.
Click Printers & Scanners.
2.
The list of printers appears on the left of the window.
3. Under the list of printers, click the plus button (+).
At the top of the window, click the Default icon.
4.
5. Select your printer from the list, then click Add.
Note: If your printer was not detected, verify that the printer is on and that the Ethernet cable is
connected properly.
To add the printer by specifying the IP address:
1. From the computer Applications folder or from the dock, open System Preferences.
Click Printers & Scanners.
2.
The list of printers appears on the left of the window.
3. Under the list of printers, click the plus button (+).
Click IP.
4.
5. From the Protocol drop-down menu, select the protocol.
6. In the Address field, enter the IP address of the printer.
7. In the Name field, enter a name for the printer.
8. From the Print Using drop-down list, choose Select a driver to use.
9. From the printer software list, select the print driver for your printer model.
10. Click Add.
For reference:
Online Support Assistant at: www.xerox.com/office/WC6515support
Xerox WorkCentre 6515 Color Multifunction Printer
® ®
Installation and Setup
63
User Guide