Xerox WorkCentre 6515 User Manual page 175

Cleaning the Color Density Sensors
If the print or color density is too light, missing, or the background is foggy, clean the color density
sensors.
1. Power off the printer. For details, refer to
2. Lift the rear door release and pull open the door.
3. Use a dry cotton swab to clean the color density sensors.
4. Close the rear door.
Turning the Printer On and Off
Xerox WorkCentre 6515 Color Multifunction Printer
® ®
Maintenance
on page 52.
175
User Guide