Configuring Remote Services Upload
Remote Services is a suite of features that simplify printer ownership and administration. It provides free
services to enable administration of metered billing and supplies replenishment plans for printers on a
network.
Before you begin, if your network uses an HTTP proxy server, obtain the information about your proxy
server. For details, refer to
Setting Up a Proxy Server
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2.
In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
Click Connectivity.
3.
4.
For Protocols, click HTTP.
5.
To enable a Proxy Server, for Proxy Server, click the toggle button.
Note:
A check mark on the toggle button indicates that the setting is enabled.
6.
To set the configuration type, click Setup and select an option:
If your proxy server uses automatic configuration, select Automatic.
−
−
If your proxy server uses a configuration script, select Configuration Script. Type the URL to
locate the configuration script.
If your proxy server uses manual configuration, select Manual, then configure the settings. For
−
assistance, contact your system administrator.
Click OK.
7.
Enabling Remote Services
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2.
In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
Click System > Remote Services Upload.
3.
4.
For Remote Services, click Enable.
Click OK.
5.
Setting up a Proxy Server
on page 265.
on page 265.
on page 293.
Xerox
WorkCentre
6515 Color Multifunction Printer
®
®
System Administrator Functions
Logging In as
Logging In as
User Guide
293