Xerox WorkCentre 6515 User Manual page 214

Color multifunction printer
Hide thumbs Also See for WorkCentre 6515:
Table of Contents

Advertisement

Troubleshooting
Notes:
To enhance print quality, the toner/print/drum cartridges for many models of equipment are
designed to cease functioning at a predetermined point.
Grayscale images printed with the composite black setting increment the color-pages counter,
because color consumables are used. Composite black is the default setting on most printers.
Symptom
• Page Margins Are
Inconsistent.
• The image is not centered
on the page or the margins
are not consistent.
Faded printouts with multiple
colors faded.
214
Xerox
WorkCentre
®
User Guide
Probable Causes
A paper registration
adjustment is
needed.
The toner cartridges
are not Xerox
toner
®
cartridges.
The paper being used
is outside the
recommended
specification range.
The paper type is
heavier or thicker
than the paper type
selection.
The bias transfer
voltage is not
properly adjusted for
the paper type.
The settings in the
application or print
driver are incorrect.
The paper is damp.
The high-voltage
supply is defective.
6515 Color Multifunction Printer
®
Solutions
Use the paper registration procedure to adjust the image
position on the page. For details, refer to
Registration
on page 178.
Verify that the toner cartridges meet specifications, and
replace them if necessary.
Replace the paper with a recommended size and type,
and confirm that your control panel and print driver
settings are correct. For details, refer to
on page 68.
• Ensure that the proper paper is loaded in the paper
tray.
• Choose a heavier paper type at the control panel and
in the print driver.
• Use a lighter paper or paper type.
Verify that the paper types set in the control panel and
the print driver match the paper loaded in the tray.
Print the Demonstration Print from the Information Pages
menu. For details, refer to
If the Demo Print looks correct, the printer is printing
properly. Verify that the application and the print driver
selections are correct for your print job.
Replace the paper.
For assistance, go to the Xerox
www.xerox.com/office/WC6515support.
Adjusting Paper
Supported Paper
Information Pages
on page 32.
Support website at
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents