Displaying And Maintaining Gvrp - HP A5120 EI Series Configuration Manual

To do...
Configure the Leave timer
As shown in
guidelines to configure GARP timers:
If you want to set a value beyond the value range for a timer, you can change the value range by

tuning the value of another related timer.
If you want to restore the default settings of the timers, restore the Hold timer first, followed by the

Join, Leave, and LeaveAll timers.
Table 19 Dependencies of GARP timers
Timer
Hold
Join
Leave
LeaveAll

Displaying and maintaining GVRP

To do...
Display statistics about GARP on
ports
Display GARP timers on ports
Display the local VLAN information
that GVRP maintains on ports
Display the current GVRP state in the
specified VLANs on ports
Display GVRP statistics on ports
Display the global GVRP state
Display the information about
dynamic VLAN operations on ports
Table 19, the value ranges for GARP timers are dependent on one another; use the following
Lower limit
10 centiseconds
No less than two times the Hold timer
setting
Greater than two times the Join timer setting
Greater than the Leave timer setting
Use the command...
garp timer leave timer-value
Upper limit
No greater than half of the Join timer setting
Less than half of the leave timer setting
Less than the LeaveAll timer setting
32,765 centiseconds
Use the command...
display garp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display garp timer [ interface interface-
list ] [ | { begin | exclude | include }
regular-expression ]
display gvrp local-vlan interface
interface-type interface-number [ | {
begin | exclude | include } regular-
expression ]
display gvrp state interface interface-
type interface-number vlan vlan-id [ | {
begin | exclude | include } regular-
expression ]
display gvrp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display gvrp status [ | { begin | exclude
| include } regular-expression ]
display gvrp vlan-operation interface
interface-type interface-number [ | {
begin | exclude | include } regular-
expression ]
149
Remarks
Optional
60 centiseconds by default
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view