Enabling Redisplaying Entered-But-Not-Submitted Commands - HP 5130 EI series Configuration Manual

Step
1. Enter system view.
2. Assign a command
to a hotkey.
3. (Optional.) Display
hotkeys.
Table 2 System-reserved hotkeys
Hotkey
Ctrl+A
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+H
Ctrl+K
Ctrl+R
Ctrl+V
Ctrl+W
Ctrl+X
Ctrl+Y
Ctrl+Z
Ctrl+]
Esc+B
Esc+D
Esc+F

Enabling redisplaying entered-but-not-submitted commands

Your input might be interrupted by system information output. If redisplaying entered-but-not-submitted
commands is enabled, the system redisplays your input after finishing the output. You can then continue
entering the command line.
Command
system-view
hotkey { ctrl_g | ctrl_l | ctrl_o |
ctrl_t | ctrl_u } command
display hotkey
Function
Moves the cursor to the beginning of a line.
Moves the cursor one character to the left.
Stops the current command.
Deletes the character at the cursor.
Moves the cursor to the end of a line.
Moves the cursor one character to the right.
Deletes the character to the left of the cursor.
Aborts the connection request.
Redisplays the current line.
Pastes text from the clipboard.
Deletes the word to the left of the cursor.
Deletes all characters to the left of the cursor.
Deletes all characters from the cursor to the end of the line.
Returns to user view.
Terminates the current connection.
Moves the cursor back one word.
Deletes all characters from the cursor to the end of the word.
Moves the cursor forward one word.
6
Remarks
N/A
By default:
•
Ctrl+G is assigned the display
current-configuration command.
•
Ctrl+L is assigned the display ip
routing-table command.
•
Ctrl+O is assigned the undo debugging all
command.
•
No command is assigned to Ctrl+T or
Ctrl+U.
Available in any view.