Connecting A Pc To This Unit; Switching To Usb Device Mode - Panasonic AJ-HPM100E Operating Instructions Manual

Switching to USB Device Mode

2
1
Press the PC button when this unit is idle.
82
Using USB Connectors and SD Memory Cards: Connecting a PC to This Unit

Connecting a PC to This Unit

1,4
CONTROL
REMOTE
LOCAL
3 4
1 3 2 4
1 2
UNITY UNITY
10
0
10
20
30
CH
1/3
PB
2
Select [USB DEVICE] in the confirmation screen and
press the SET button.
PC
CH
2/4
"USB DEVICE" flashes on the LCD monitor to indicate that
the unit is entering the USB host mode. After the mode
switch, "USB DEVICE DISCONNECT" appears on the LCD
screen. This message is replaced by a "USB DEVICE
CONNECT" message when the connection with the PC is
completed.
3
Use USB device mode operations.
4
Press the PC button to return to regular mode.
◆ NOTE:
• Recording and playback are not available in the USB device
mode.
• In the play list mode, the PC button is not available during
remote operation.
• In the USB device mode, USB is displayed on the panel and the
VIDEO and AUDIO INPUT SELECT indications disappear.
USB HOST
USB DEVICE
CANCEL