Stop Mode Setup - Panasonic AJ-HPM100E Operating Instructions Manual

Memory card portable recorder/player
Hide thumbs Also See for AJ-HPM100E:
Table of Contents

Advertisement

7.
Filename
Shows the number of the P2 card slot where the
current play list is stored and its filename.
P2 card slot number:
P2 cards slot and file name
are displayed in white:
Filename is gray:
P2 card slot number is red:

Stop Mode Setup

You can set whether pressing the STOP
play list playback should return you to the play list after
playback or not. Use the following procedure to make the
desired setting.
1
Open the play list screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [SETTING] –
[STOP MODE].
8.
Filename
9.
Normal
The file can be loaded
but not edited. To edit
such a file, store it on a
P2 card to enable
editing.
10.
The card storing the
saved file is not
inserted.
The file stored on a P2
card cannot be found.
4
button during
5
Start TC
Displays the start time code value for changing the
time code during playback.
REMAIN(EXTRA)
Indicates the remaining time available for voice-over
recording.
A play list not saved to a P2 card is indicated in gray
and has no time indication.
P2 card slot number and hard disk drive status
Displays P2 card and USB hard disk status.
➝Refer to "Thumbnail Screen Names and Functions."
Select [RETURN] or [STAY] and press the SET
button.
RETURN:
A return is made to the play list screen
when the STOP
an automatic stop occurs at the start or
end of all events). The cursor position
moves to the event where the button was
pressed.
STAY:
A return to the play list screen is not
made and a still picture is output when
the STOP
an automatic stop occurs at the start or
end of all events).
Use this setting when you do not want to
change the playback start location.
To return to the event list after making
this setting, press the PLAY LIST button
or the EXIT button.
Press the MENU button to end setup.
◆ NOTE:
• During remote play list playback using a 9-pin cable, set to
STAY and the location will not change when the STOP
button is pressed.
Using Play List: Play List Function
is pressed (or when
button is pressed (or when
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj-hpm100p

Table of Contents