Select clips for processing in the thumbnail screen as
described below.
1
2
1
Use the cursor buttons to place the yellow frame
(cursor) on the desired clip.
◆ NOTE:
• Hold down the SHIFT button and press the REW/FF button or the
4/5 buttons to move the cursor to the first or last clip.
2
Press the SET button.
A blue-green frame appears on the clip selected with the
cursor to indicate that it is selected.
◆ NOTE:
• Repeat steps 1 and 2 to select multiple clips.
• After selecting a clip, move the cursor to another clip, hold down
the SHIFT button and press the SET button to select another
clip. This method allows you to select both clips.
Selecting Clips
Canceling a Selection
1
Place the cursor on a selected clip and press the SET
button again.
This cancels the selection.
◆ NOTE:
• Holding down the SHIFT button while pressing the EXIT button
cancels made selections.
Clip Management: Selecting Clips
37