Panasonic AJ-HPM100E Operating Instructions Manual page 13

■ Connecting a P2 Card Camera
A P2 card recorded in a P2 camera recorder plugs directly
into a PC card slot for immediate access. The P2 card is a
semiconductor memory card that Panasonic developed for
professional AV use.
<About P2 cards>
Recording time (cards used: 1)
Model DVCPRO/DV
Number (Audio 2ch)
AJ-P2C004HG Approx. 16 min. Approx. 8 min.
AJ-P2C008HG Approx. 32 min. Approx. 16 min. Approx. 8 min.
MEMO: These are card models and capacities available as
of November 2006. Greater capacities and
technical innovation may extend the recording
time.
● This unit cannot use AJ-P2C002SG (2 GB) cards.
● Visit the web site below and go to P2 support desk page for
the latest information on P2 card and SD memory card.
English: https://eww.pavc.panasonic.co.jp/pro-av/
■ 9-inch Wide LCD Monitor
A 9-inch wide LCD monitor is provided for ease of viewing HD
video.
■ Thumbnails for Managing Clips Visually
The 9-inch color LCD monitor on the front panel displays clips
(thumbnails) that represent P2 card content. Settings can be
made to show only specific clips in the thumbnail screen.
Clips selected from the thumbnail list can be played back
immediately, shot marks can be added, file data regarding the
clips can be confirmed and added and other clip
management operations are also available.
<About clips>
A clip is a single data item that contains video, audio,
metadata and other additional information. Normally, a clip is
one shot generated from the start of recording until recording
stops. However, when a shot spans multiple P2 cards, the
video on each card is handled as an independent clip. The
image at the start of recording appears in the thumbnail
screen as a representative image of that clip.
DVCPRO50 DVCPRO HD
(Audio 4ch) (Audio 8ch)
Approx. 4 min.
■ Creating Play Lists and the Playback Function
You can select video and audio recorded on the six P2 cards
installed in the unit for playback in the desired order.
● Simplified audio split editing, voice-over recording and
playback functions provided
The IN points for audio and video (audio IN point split) can be
shifted in playback and any section of 1 or 2 channel audio
can be replaced with separately prepared audio data (voice-
over function) during playback.
● Time code/Player function for editing provided
This unit has a built-in TCG (time code generator) and TCR
(time code reader). In addition to the internal time code,
external time code input or a VITC input signal can be
recorded as the time code.
The unit can also be used as a player for an editing system
using RS-422A.
● Compatible with HD (Native clips can only be played back),
SD, NTSC and PAL
This unit can record and play back HD, SD, NTSC and PAL
signals. It can also handle analog video, SDI, as well as
IEEE1394 input and output.
* Native clips
Native clips are clips that take advantage of AG-HVX200's
capability to record only effective frames. (For details, refer to the
Operating Instructions supplied with the AG-HVX200.)
Such clips are viewed at 24PN, 30PN (59.94 Hz) or 25PN (50 Hz)
and cannot be recorded on this unit. This unit converts such clips
to 60P (50P) for playback.
● High-quality 8-channel digital audio
8-channel PCM audio where each channel (HD SDI has 8
independent channels while the analog interface has 4
independent channels) can be recorded separately or mixed.
● Built-in up and down cross conversion
Built-in up and down cross conversion playback function is
provided as standard.
■ Dial Jog/Dial Shuttle
The jog provides slow playback at rates between –1.0 to +1.0.
The shuttle allows high-speed forward and reverse playback
up to 100 times normal speed. At speeds up to 10×, the sound
is also audible.
■ Menu-based Setup
Perform setup while viewing the setup menus on the 9-inch
color LCD monitor of this unit or a monitor TV display.
■ Connection to Hard Disk for Handling Large
Data Volumes
Card data can be saved onto a hard disk that is equipped with
a USB 2.0 interface. Data stored on HDD can be written back
to a card. A USB 2.0 connection with a PC allows you to use
P2 cards inserted in the slots on this unit as mass storage.
This setup provides direct nonlinear editing.
13
Introduction: Features