Displaying Hard Disk Information (Explorer Screen) - Panasonic AJ-HPM100E Operating Instructions Manual

Displaying Hard Disk Information (Explorer Screen)

Use this function to view hard disk information.
1
Switch to the USB host mode.
2
Connect a USB hard disk.
3
Open the thumbnail screen.
4
Press the MENU button.
5
Use the cursor buttons to choose [HDD] –
[EXPLORE] and press the SET button.
1)
2)
The following hard disk information appears.
86
Using USB Connectors and SD Memory Cards: Using This Unit With a Hard Disk
5)
4)
3)
1)
Display status
The name of the screen (HDD-EXPLORE)
2)
Disk information
The following information appears.
Hard disk that
makes it possible
to read and write
data by the card.
Regular hard disk PARTITION:
3)
Partition information
(Details are provided on the next page.)
◆ NOTE:
• The partition information for an invalid partition on a P2
store is indicated in gray.
• Only information for the primary partition is displayed for a
hard disk that is formatted using FAT.
4)
USB HOST
The USB host mode indicator
5)
Hard disk drive status
Indicates whether or not a hard disk is connected and
hard disk type.
PARTITION: TYPE S/
P2STORE
VENDOR: Name of vendor
MODEL: Model name
SIZE: Size (unit: GB)
USED: Memory used
(unit: GB)
Used P2 card
area (unit: cards)
up to 15 cards
REMAIN: Remaining
memory
(unit GB)
FAT/OTHER
VENDOR: Name of vendor
MODEL: Model name
SIZE: Memory used
(unit: GB)