Panasonic AJ-HPM100E Operating Instructions Manual page 57

7.
ENTRY button
ENTRY + IN/OUT
Use these functions to create play list events. In the event
register mode (when the EVENT button is on), hold down
the ENTRY button and press the IN (OUT) button to
register an IN (OUT) point. When an OUT point has been
registered in a new event, it automatically becomes
possible to register a new event (auto event increment
function). Registering an OUT point but no IN point in a
clip automatically makes the beginning of that clip the IN
point.
ENTRY + SPLIT
Use these buttons for splitting audio. In the event
register mode (when the EVENT button is on), hold
down the SPLIT button and press the ENTRY button.
The location where the button was pressed will
become the audio split IN point.
CLIP ➝ LIST button
8.
Use this button to import a clip selected in the
thumbnail screen into the play list. Select a clip in a
thumbnail display (multiple clips can be selected) and
switch to the play list display. Hold down the SHIFT
button and press the ENTRY button and the beginning
of the clip at the cursor position in the play list
becomes the IN point and its end point becomes the
OUT point.
9.
OUT button
For details, refer to the descriptions of 7. ENTRY
button, 12. TRIM+ / – buttons, 17. RESET button and
19. GO TO button.
10.
SHIFT button
11.
+ / – button
In the play list, press this button to zoom in (+) or zoom
out (–) the time line.
12.
TRIM + / – buttons
Use these functions to change play list events. Select
the event you want to change in the play list, hold down
the IN, OUT and SPLIT buttons and press the TRIM+/–
button to change the color of the IN, OUT and SPLIT
points. Use this button to increment (+) and decrement
(–) the IN, OUT or SPLIT point one frame at a time. Then
press ENTRY to return to the original color and apply
the change.
◆ NOTE:
• At a 24PN frame rate, you can change the frame rate in
multiples of 4 frames.
13.
UNITY/VAR/channel select switches and audio
playback level controls
• Use to control playback signal levels, for example, during
audio playback and voice-overs.
14.
A. DUB button
Use to make voice-overs.
➝For details, refer to "Simplified Voice-Over."
15.
STILL/PAUSE button
16.
REVIEW button
To review all events at the cursor position, hold down
the SHIFT button and press the PLAY button. Playback
starts 3 s before the IN point and stops 1 s after the
OUT point.
17.
RESET button
RESET + IN/OUT/SPLIT
Hold down the IN, OUT or SPLIT button and press the
RESET button in the event register screen to delete the
IN, OUT or SPLIT point.
SHIFT + RESET
In the play list screen, hold down the SHIFT button and
press the RESET button to create a new play list file
(fulfils the same function as [FILE] – [NEW]).
18.
MOVE button
Use this function to move an event to another line while
the play list is displayed. Use the SET button to select
an event you want to move when the play list is
displayed. Then move the cursor to the line you want to
move the event to and press this button to move the
selected event to the location right before the cursor.
19.
GO TO button
GO TO + IN/OUT/SPLIT
Use these keys to find the IN and OUT points in the
event register mode (when the EVENT button is on).
During normal playback, still playback and other
playback operations, hold down the IN (OUT or SPLIT)
button and press the GO TO button to move to the IN
(OUT or SPLIT) point and resume playback from there.
20.
DELETE button
Use this button to delete events when the play list is
displayed. Place the cursor on the event you want to
delete and press the SET button to select it. Then hold
down the SHIFT button and press the INSERT button to
delete the selected event.
Using Play List: Play List Function
57