Panasonic AJ-HPM100E Operating Instructions Manual page 108

Item
FR SUPER
No. DISP.
727 REC CH3
728 REC CH4
731 PB FADE
732 EMBEDDED AUD
775 25M REC CH
776 REF LEVEL
777 CH2 MIC PWR
790 VOL SEL
792 A DUB CH
108
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 CH1 Specifies the input signal to be recorded on the audio CH3.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH4.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
0003 CH4 2: Audio input CH3 signal
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 AUTO Specifies audio processing to be performed between clips and edit points created using
play list or edit copy.
0001 CUT
0: Depends on recording status. (Refer to the section "Audio V Fade Function.")
1: Forcible cut.
NOTE:
The IEEE1394 connector output is forcibly cut also in the AUTO setting.
0000 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
0001 ON output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
0000 2CH
Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV (25
Mbps) recording.
0001 4CH
0: Does not supply microphone current.
1: Records on four channels.
NOTE:
DVCPRO HD always records on 8 channels and DVDPRO50 always records on four
channels.
For AJ-HPM100P
0000 FS-20 Specifies the standard level.
0: 20 dB
0001 FS-18
1: 18 dB
0002 FS-12
2: 12 dB
For AJ-HPM100E
0000 FS-20
0001 FS-18
0002 FS-12
0000 OFF Turns on and off the CH2 microphone power supply.
0001 ON 0: Does not use the microphone power supply.
1: Uses the jack switch to turn the microphone power supply on and off.
0000 CH1-4
Specifies operation of the recording level controls.
0: CH1 to CH4 only are variable, CH5 to CH8 are UNITY level.
0001 CH1-8
1: In addition to CH1 to CH4, which are variable, CH5 to CH8 being linked to CH1 to CH4
operation also become variable.
0000 CH1 Specifies tracks to be used for voice-overs.
0001 CH2
0002 CH3
0003 CH4
0004 CH1+2
0005 CH3+4
Settings and brief function description