Buttons Used In Play List Operations - Panasonic AJ-HPM100E Operating Instructions Manual

Buttons Used in Play List Operations

1
2
3
1.
PLAY LIST button
Press to switch to play list mode. This button lights in
the play list mode.
In the stop mode or when thumbnails are displayed,
press this button to open the play list screen.
To exit the play list mode, press this button (which is
lit), the light goes out and the stop mode reappears.
You cannot switch to the PLAY LIST mode from the
USB mode.
2.
SET/MULTI SEL button
Use to make single or multiple selections. First press
the SET button to select an event. Then move the
cursor and hold down the SHIFT button while pressing
this button to select all events from the first selected
event to the event at the cursor position.
3.
EXIT/CANCEL button
• EXIT button
This button performs the same function as EXIT in a
menu display.
• CANCEL button
To cancel all selected events, hold down the SHIFT
button and press the EXIT button.
56
Using Play List: Play List Function
18,19
22
23 20,21
4 5 6 7,8
17 16 15 14
9 10 11,12
▲▼ b a Cursor buttons
4.
In the play list, press this button to move the play list
and time line pointer location.
Hold down the SHIFT button and press the 4/5
buttons to move the cursor to the beginning or end of
an EVENT.
5.
MENU/DIAG button
Press to open the MENU, press again to close it.
6.
IN button
For details, refer to the descriptions of 7. ENTRY
button, 12. TRIM+ / – buttons, 17. RESET button and
19. GO TO button.
PC
CONTROL
REMOTE
LOCAL
3 4
1 3 2 4
1 2
UNITY UNITY
10
0
10
20
30
CH CH
1/3 2/4
PB
13