Panasonic AJ-HPM100E Operating Instructions Manual page 99

Item
FR SUPER FR
No. DISP. No.
0000
0001
0002
155 AUTO REC
0000
0001
0002
0003
180 BATTERY SEL
0004
0005
0006
0000
0023
181 TYPE-A NEAR
0044
0000
0018
182 TYPE-A END
0034
0000
0023
183 TYPE-B NEAR
0044
0000
0018
184 TYPE-B END
0034
Setting
SUPER
DISP.
OFF Select whether recording and stopping should be performed automatically according to
the Recording Marks in the HD SDI input signals from Panasonic camera-recorders.
TYPE1
0: No automatic recording/stopping
TYPE2
1: Recording and stopping is performed automatically according to the Recording Marks
in the LTC information attached to HD SDI signals.
2: Recording and stopping is performed automatically according to the Recording Marks
in the SVITC information attached to HD SDI signals.
NOTE:
• Set the CONTROL switch to REMOTE. Refer to "Panasonic camera-recorders,
recording formats and Recording Mark" on the next page before selecting TYPE1 or
TYPE2.
• Select TYPE1 or TYPE2. To start automatic recording, simultaneously press the REC
button and the STILL button to place this unit in the REC PAUSE mode. This function
will not work in any mode other than REC PAUSE. The unit returns to REC PAUSE mode
when automatic stop is activated.
• In normal recording mode, this setting is not available and auto stop is not activated.
NiCd12 Sets the battery type.
0: Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V)
NiCd13
1: Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V)
NiCd14
2: Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V)
S-LION
3: Settings for 1 pc. lithium-ion battery (NEAR: 11.0 V, END: 10.6 V)
I-LION
4: Settings for 1 pc. lithium-ion battery (NEAR: 13.4 V, END: 10.6 V)
TYPE-A
5: Battery specified by menu No. 181 TYPE-A NEAR item and No. 182 TYPE-A END item
TYPE-B
6: Battery specified by menu No. 183 TYPE-B NEAR item and No. 184 TYPE-B END item
10.6 Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
| | voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped.
12.9
NOTE:
| |
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also when
15.0
AC power is used.
• A setting that is smaller than END cannot be made.
10.6 Specifies the voltage (in 0.1 V steps) when this unit will automatically power off because the
| | voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped.
12.4
NOTE:
| |
• A setting that is larger than NEAR cannot be made.
14.0
10.6 Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
| | voltage of a TYPE-B battery selected in menu No. 180 BATTERY SEL item has dropped.
12.9
NOTE:
| |
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also when
15.0
AC power is used.
• A setting that is smaller than END cannot be made.
10.6 Specifies the voltage (in 0.1 V steps) when this unit will automatically power off because the
| | voltage of a TYPE-B battery selected in menu No. 180 BATTERY SEL item has dropped.
12.4
NOTE:
| |
• A setting that is larger than NEAR cannot be made.
14.0
Settings and brief function description
99
Setup: Item Settings