Dif - Panasonic AJ-HPM100E Operating Instructions Manual

Item
FR SUPER
No. DISP.
0000
0001
793 A DUB PB MIX
Subscreen
0000
0001
01 CH1 MIX
0002
0003
0000
0001
02 CH2 MIX
0002
0003
0000
0001
03 CH3 MIX
0002
0003
0000
0001
04 CH4 MIX
0002
0003
0000
796 A DUB FADE 0001
0000
0001
797 A DUB MONI

DIF

This menu is used for setting up the digital video interface.
Item
FR SUPER
No. DISP.
0000
0001
0002
880 DIF SPEED
0000
882 DIF IN CH
0063
0064
0000
883 DIF OUT CH
0063
0064
Setting
FR SUPER
No. DISP.
OFF Specifies whether or not the playback sound be mixed in the voice-over.
0: Playback sound is not mixed.
ON
1: The input and playback sound are mixed in the recording.
NOTE:
Press the STOP or SET button to open the subscreen to select the channels that will be
mixed. To exit the subscreen, press the STOP or SET button again.
CH1 Specifies the playback channels that will be mixed and recorded on CH1.
This item is available when CH1 or CH1 + 2 is selected in menu No. 792 A DUB CH.
CH2
CH3
CH4
CH1 Specifies the playback channels that will be mixed and recorded on CH2.
CH2
This item is available when CH2 or CH1 + 2 is selected in menu No. 792 A DUB CH.
CH3
CH4
CH1 Specifies the playback channels that will be mixed and recorded on CH3.
CH2 This item is available when CH3 or CH3 + 4 is selected in menu No. 792 A DUB CH.
CH3
CH4
CH1 Specifies the playback channels that will be mixed and recorded on CH4.
CH2 This item is available when CH4 or CH3 + 4 is selected in menu No. 792 A DUB CH.
CH3
CH4
CUT Specifies audio processing for the IN and OUT points during voice-overs.
FADE 0: Cut processing
1: V fade processing
OFF Specifies whether or not the recorded sound be output during a voice-over.
ON
0: Recorded sound is not output.
1: Recorded sound is output.
Setting
FR SUPER
No. DISP.
S100 Specifies the transfer speed of digital video interface output.
S200 0:100 Mbps
S400 1:200 Mbps
2:400 Mbps
NOTE:
A DVCPRO HD format signal cannot be output when S100 is selected.
0 Specifies input channels.
| | 0 - 63: These channels are fixed to assigned values.
63 64: This channel is not fixed to assigned values.
AUTO When the power is on, the input channel is initialized to 63.
0 Specifies output channels.
| | 0 - 63: These channels are fixed to assigned values.
63 64: This channel is not fixed to assigned values.
AUTO
When the power is on, the output channel is initialized to 63.
Settings and brief function description
* An underlined setting indicates an initial value.
Settings and brief function description
109
Setup: Item Settings