2
4
2
1
3
1
3
2
5
ENGINE REMOVAL
CLUTCH CABLE
1. Loosen:
• Adjuster (Clutch cable)
2. Loosen:
• Adjuster lock nuts (Clutch cable)
3. Disconnect:
• Clutch cable
Y.P.V.S. CABLES
1. Remove:
• Pulley cover (Power valve)
2. Remove:
• Pulley (Power valve)
Removal steps
4
• Loosen both locknuts
1
• Insert a pin (Ø4mm.(Ø0.16in)) through the
5
• Remove the pulley
• Remove the pin
5-3
(from clutch push lever
).
adjusters
.
aligning indent in the pulley
hole to lock the pulley.
and then disconnect the Y.P.V.S. cables
from the pulley.
ENG
and cable guide
and turn in both
and into the
from the power valve