Yamaha DT125RE 2005 Service Manual page 130

ASSEMBLING THE FRONT FORK LEGS
2. Lubricate:
• inner tube's outer surface
Recommended lubricant
Fork oil 10W or equivalent
3. Tighten:
• damper rod assembly bolt
62 Nm (6.2 m•kg, 45 ft•lb)
NOTE:
While holding the damper rod assembly with
the damper rod holder and T-handle, tighten
the damper rod assembly bolt.
Damper rod holder
90890-01388
T-handle
90890-01326
4. Install:
• outer tube bushing
(with the fork seal driver weight and fork
seal driver attachment)
Fork seal driver weight
90890-01367
Fork seal driver attachment
90890-01381
5. Install:
• washer
• oil seal
(with the fork seal driver weight and fork
seal driver attachment)
CAUTION
Make sure the numbered side of the oil seal
faces up.
4-42
CHAS
LOCTITE®