Yamaha DT125RE 2005 Service Manual page 230

3
2
WATER PUMP
3. Install:
• Housing cover (Water pump)
• Water outlet pipe
2
CAUTION
1
• Always use new gaskets
• Always use a new O-ring
4. Install:
• Crankcase cover (Right)
1
• Brake pedal
• Return spring
• Drain plug (Transmission oil)
• Drain plug (Coolant)
5
4
NOTE:
Before installing the brake pedal apply lithium
soap base grease to the brake pedal pivot
shaft.
s WARNING
s
Always use new cotter pin and gasket.
5. Install:
• Screw (Water outlet pipe)
1
6-5
COOL
Screw (Crankcase cover):
8 Nm (0.8 m•kg, 5.8 ft•lb)
Screw (Water Outlet Pipe):
8 Nm (0.8 m•kg, 5.8 ft•lb)
Screw (Crankcase cover):
8 Nm (0.8 m•kg, 5.8 ft•lb)
Screw (Brake pedal):
20 Nm (2.0 m•kg, 14 ft•lb)
Drain plug (Transmission Oil):
15 Nm (1.5 m•kg, 11 ft•lb)
Drain plug (Coolant):
10 Nm (1.0 m•kg, 7.2 ft•lb)
Screw (Water Outlet pipe):
8 Nm (0.8 m•kg, 5.8 ft•lb)