Yamaha DT125RE 2005 Service Manual page 122

ASSEMBLING AND INSTALLING THE FRONT AND
REAR
1
1
REAR BRAKE CALIPER
9. Bleed:
• brake system
Refer to "AIR BLEEDING" section.
10. Check:
• brake fluid level
Below the minimum level mark
the recommended brake fluid to the proper
level.
Refer to "BRAKE FLUID INSPECTION" in
chapter 3.
"Lower" level line.
11. Install:
• Diaphragm
• Inner cap (Reservoir tank)
• Cap (Master cylinder)
12. Adjust:
• Rear brake pedal height (a)
Pedal height:
15mm (0.95in)
Below top of footrest.
Refer to the "REAR BRAKE ADJUST-
MENT" section.
13. Adjust:
• Drive chain slack (a)
Refer to the "DRIVE CHAIN SLACK
ADJUSTMENT" section in chapter 3.
Drive chain slack:
DT125RE 40~55mm (1,77~2,16in.)
DT125X 25~40mm (0,98~1,58 in.)
4-34
CHAS
Add