Yamaha DT125RE 2005 Service Manual page 155

1
4
3 4
REMOVING THE DRIVE CHAIN
1
2
2 1
1
4-67
REMOVING THE DRIVE CHAIN
1. Stand the motorcycle on a level surface.
s WARNING
s
Securely support the motorcycle so that
there is no danger of it falling over.
NOTE:
Place the motorcycle on a suitable stand so
that the rear wheel is elevated.
2. Remove:
• Crankcase cover (left)
3. Straighten:
• Lock washer tab
4. Loosen:
• Nut (drive sprocket)
NOTE:
When loosening the drive sprocket nut, apply
the rear brake pedal and transmission gear to
the 6th position.
5. Remove:
• Clip (master link)
• Plate (master link)
• master link
• O-rings
• Drive chain
6. Remove:
• Chain guide
• Drive sprocket
7. Remove:
• Rear wheel
Refer to the "REAR WHEEL REMOVAL"
section.
CHAS