Yamaha DT125RE 2005 Service Manual page 108

DISASSEMBLING THE REAR BRAKE CALIPER
3
1
(a)
3. Disconnect the dust boot
out the caliper body from the guide shaft
on te caliper bracket
2
4. Remove:
• Rear wheel
Refer to the "REAR WHEEL" section.
• Caliper bracket
5. Remove:
• Caliper piston
• Dust seal
• Piston seal
a. Blow compressed air into the brake hose
joint opening k a to force out the piston from
the brake caliper.
s WARNING
s
• Cover the brake caliper piston with a rag.
Be careful not to get injured when the
piston is expelled from the brake caliper.
• Never try to pry out the brake caliper pis-
ton.
b. Remove the brake caliper piston seals.
4-20
CHAS
and then pull
.