Yamaha DT125RE 2005 Service Manual page 216

ENGINE ASSEMBLY AND ADJUSTMENTS
1
2
1
3
5
2
4
1
3. Install:
• Dowel pins
• Gasket <NEW> (Cylinder) NEW
s WARNING
s
Always use a new gasket
4. Install:
• Cylinder
• Clutch cable guide
NOTE:
Install the cylinder with one hand while com-
pressing the piston rings with the other hand
5. Tighten:
• Nuts (cylinder)
Nut (Cylinder):
28 Nm (2.8 m•kg, 20 ft•lb)
NOTE:
Tighten the nuts ins stage using a crisscross
pattern.
6. Install:
• Gasket (Cylinder head)
• Cylinder head
s WARNING
s
Always use a new gasket
NOTE:
The "UP" mark on the gasket must be facing
up
7. Tighten:
• Nuts (Cylinder head)
Nut (Cylinder Head):
22 Nm (2.2 m•kg, 16 ft•lb)
NOTE:
Tighten the nuts in stage, using a crisscross
pattern
5-54
ENG