Yamaha DT125RE 2005 Service Manual page 140

2
INSTALLATION
6. Install:
• Meter assembly
Bolt (Meter assembly):
1
5Nm to 8Nm (0.5 to 0.8 m·kg, 3.6
to 5.8 ft·lb)
7. Install:
• Front fork
Refer to the "FRONT FORK INSTALLA-
TION" section.
Pinch Bolt (Under Bracket):
20 to 25Nm (2.0 to 2.5 m·kg, 14.6
to 18.3 ft·lb)
NOTE:
In this stage, temporarily tighten the pinch
bolts (Handlebar crown).
8. Tighten:
• Flange nut (Steering stem)
• Pinch bolts (Handlebar crown)
1 Flange nut (Steering stem):
120 to 155 Nm (12 a 15.5 m·kg,88
to 110ft·lb)
Pinch bolt (Handlebar crown):
12 to 28 Nm (1.2 to 2.8 m·kg, 8.80
to 20.5ft·lb)
NOTE:
• Install the brake hose guide to the left side
only.
• On the left side, install the flasher light
having a chocolate color lead. Next, install
the other flasher light with a dark green
color lead.
4-52
CHAS