Yamaha DT125RE 2005 Service Manual page 210

ENGINE ASSEMBLY AND ADJUSTMENTS
3
2
1
8
5
4
3
2
1
Always use a new lock washer
5. Tighten:
NOTE:
Hold the rotor to tighten the nut (Primary drive
gear)
the Universal Rotor Holder
6. Bend the lock washer tab
9 8
7. Lubricate:
7
5-48
s WARNING
s
• Nut (Primary drive gear)
• Nut (Balancer driven gear)
Nut (Primary drive gear):
80 Nm (8.0 m•kg; 58 ft•lb)
Nut (Balancer driven gear):
55 Nm (5.5 m•kg; 40 ft•lb)
and nut (Balancer driven gear)
Universal Rotor Holder:
90890-01235
flats.
• Push rod #2
• Ball
Lithium Soap Base Grease
ENG
by
along the nuts