KMC Controls CTE-5202 Application Manual page 9

KMC CTE-50xx
Thermostat Replaced
CTE-5001/5011*
CTE-5002/5012*
CTE-5003/5013*
CTE-5006/5016**
CTE-5015**
*NOTE: These models require a power supply of 9.1 VDC, typically supplied by a CEP/CSP-4xxx controller/actuator, and they have a
0–6 VDC output range. See the discussion on 9.1 VDC power under the CTE-1x0x cross-reference NOTE on page 8. Need for the REE-
1014 in applications is eliminated.
**NOTE: These models require a power supply of 14–20 VDC, typically using the 16 VDC power supplied by a CSP-5001/5002
controller/actuator. The CTE-5202 can use the same 16 VDC power (or 14–35 VDC or 24 VAC).
KMC / Nailor /
Anemostat*
Dynacon*
CTE-5101
CTE-5102 13-33
CTE-5103 13-35
CTE-5104 13-34
CTE-5105
*NOTE: CTE-510x thermostats require a power supply of 14–20 VDC, typically using the 16 VDC power supplied by a CSP-5001/5002
controller/actuator. The CTE-5202 can use the same 16 VDC power (or 14–35 VDC or 24 VAC). See also the
Applications Guide.
**For applications requiring limited T1 and/or T2 signals and unlimited T3 and/or T4 signals, flow limits may need to be set on the
controller (allowing the controller to use an unlimited signal). Limits for the CTE-5202 and AO1 and AO2 would then be left at the
default 0 and 12.
Other thermostats that the CTE-5202 can be a
functional/upgrade replacement for include:
• Honeywell TB7980 (check application and
specifications)
• Johnson Controls (various—check application
and specifications)
• Kele RTC-2P (with one or less remote inputs—
check application and specifications)
General Information (All Applications)
CTE-5202 Sequence Selected
Thermostat Replaced
Metal
Carnes*
Industries*
B3-3001-191
999-2662 01EC-2119
or B3-191
B3-3001-186
999-2663 01EC-2122
or B3-186
999-2664 01EC-2120
#1
#2
(No Replacement)
#2
#1
Price
Nailor*
Industries*
10269601 /
019814-001
10269608 /
019810-001
019726-001
10269604 /
H1-981 / 019816-
001
019822-001
• PEKO (various—check application and specifica-
tions)
• Siemens (various—check application and specifi-
cations)
• Viconics (various—check application and speci-
fications)
NOTE: Products and name brands mentioned
may be trademarks of their respective
companies.
9
Example Replacement Applications
See page 45 and page 48
See page 47 (9.1 VDC)
(9.1 VDC)
See page 35 (16 VDC)
See page 33 (16 VDC)
CTE-5202
Sequence
Selected
ASC /
Titus*
#1
10269606
#3 (if T4 is not
10269607
used)**
#3 (if T3 and
T4 are not
10269603
used) **
#2
10269609
#1 (if the
setback feature
is acceptable
10269610
in place of two
independent
setpoints)
CSP-5001/5002
CTE-5202 Applications Guide, AN0912A Rev. D
(9.1 VDC)
Example
Replacement
Applications
See page 33,
page 34, and
page 41
See page 33
See page 35,
page 37, page
38, page 39, and
page 42
See page 35,
page 36, and
page 40