Cooling With Hot Water Reheat - KMC Controls CTE-5202 Application Manual

Cooling with Hot Water Reheat

See Cooling and 3-Stage Reheat on page
application operates the same except for using a hot
water valve instead of electric heating elements for
reheat (a VEB-43/46 series valve in place of the REE-
5001 relay).
CSP-4702
Controller-Actuator
(To Flow Sensor)
24 VAC @ 10 VA
(Phase) ~
–
(Neutral)
Pressure Independent VAV Applications with CSP-4702
24. This
COLD AIR SEQUENCE
12 Volts
AUX
10%
Of Loop
2° F
Heating
Setpoint
AO1 controls airflow and AO2 controls the valve.
When there is a call for heat, the thermostat
modulates the hot water valve.
MEP-4002
Actuator on
VEB-43/46
Series
Valve
Hot Water Reheat
AO2 (RA)
AO1 (DA)
2° F
Cooling
Temp. Increasing
Setpoint
29
CTE-5202
Thermostat
Select
Sequence 2
0 Volts
AO1 MAX
AO1 MIN
CTE-5202 Applications Guide, AN0912A Rev. D