Tp-8124/8125 Replacement With One Or No Mp-52Xx Actuators - KMC Controls CTE-5202 Application Manual

TP-8124/8125 Replacement with One or No MP-52xx Actuators

CTE-5202 thermostats can replace TP-8101/8102/8103
thermostats and use the 20 VDC supplied by a
controlled device. (For more information, see the
manufacturer's installation guide for the controlled
devices.)
CAUTION
Never connect together the red leads (or +20
VDC terminals) of controlled devices with
internal power supplies (with the exception of
MP-52xx actuators).
Controlled Device
with
Power Supply
(Tape Red Leads
if Present)
Barber Colman TP-81xx Thermostats Replacement Applications
Controlled Device Controlled Device
with
Power Supply Power Supply
(Tape Red Leads
if Present)
AO2 MAX
AO1 MIN
2° F
Setpoint
Select Sequence 3 (from the CTE-5202 SYSTEM
menu). See Change Configuration on page
MP-52xx Series
Actuator (or Other
with
Controlled Device
with Power Supply)
AO2 (RA)
AO1 (DA)
2° F
Heating Cooling
Setpoint
57
CTE-5202
Thermostat
AO2 MIN
AO1 MAX
Temp.
Increasing
CTE-5202 Applications Guide, AN0912A Rev. D
6.
Select
Sequence
3