Define The Plane Function - HEIDENHAIN iTNC 530 User Manual

Define the PLANE function

U
Show the soft-key row with special functions.
U Select the PLANE function: Press the TILT MACHINING
PLANE soft key: The TNC displays the available
definition possibilities in the soft-key row
Selecting the function while animation is active
U Activate animation: Set the SELECT ANIMATION ON/OFF soft key
to ON
U Start an animation for one of the definition possibilities: Press one
of the available soft keys. The TNC highlights the soft key with a
different color and begins the appropriate animation
U
To assume the currently active function: Press the ENT key or press
the soft key of the active function again. The TNC continues the
dialog and requests the required parameters
Selecting the function while animation is inactive
U
Select the desired function directly via soft key. The TNC continues
the dialog and requests the required parameters
Position display
As soon as a PLANE function is active, the TNC shows the calculated
spatial angle in the additional status display (see figure). As a rule, the
TNC internally always calculates with space angles, independent of
which PLANE function is active.
During tilting (MOVE or TURN mode) in the Distance-To-Go mode (DIST),
the TNC shows (in the rotary axis) the distance to go (or calculated
distance) to the final position of the rotary axis.
HEIDENHAIN iTNC 530 407