HEIDENHAIN iTNC 530 User Manual page 175

Abbr. Inputs
LBREAK Permissible deviation from tool length L for breakage detection. If
the entered value is exceeded, the TNC locks the tool (status L).
Input range: 0 to 0.9999 mm
Input range in mm: 0 to 3.2767
RBREAK Permissible deviation from tool radius R for breakage detection. If
the entered value is exceeded, the TNC locks the tool (status L).
Input range: 0 to 0.9999 mm
Input range in mm: 0 to 0.9999
Input range in inches: 0 to +0.03936
HEIDENHAIN iTNC 530
Dialog
Breakage tolerance: length?
Breakage tolerance: radius?
175