HEIDENHAIN iTNC 530 User Manual page 625

Remote Desktop Manager software option
Remote operation of external
computer units (e.g. a
Windows PC) via the user
interface of the TNC
Cross Talk Compensation software option (CTC)
Compensation of axis
couplings
Position Adaptive Control (PAC) software option
Changing control parameters
Load Adaptive Control (LAC) software option
Dynamic changing of control
parameters
FCL 2 upgrade functions
Enabling of significant
improvements
HEIDENHAIN iTNC 530
Windows on a separate computer unit
Incorporated in the TNC interface
Determination of dynamically caused position deviation through axis acceleration
Compensation of the TCP
Changing of the control parameters depending on the position of the axes in the
working space
Changing of the control parameters depending on the speed or acceleration of an axis
Automatic determination of workpiece weight and frictional forces
Continuous adaptation of the parameters of the adaptive precontrolling to the actual
weight of the workpiece during machining
Virtual tool axis
Touch probe cycle 441, Rapid Probing
Offline CAD point filter
3-D line graphics
Contour pocket: Assign a separate depth to each subcontour
smarT.NC: Coordinate transformation
smarT.NC: PLANE function
smarT.NC: Graphically supported block scan
Expanded USB functionality
Network attachment via DHCP and DNS
625