HEIDENHAIN iTNC 530 User Manual page 173

Abbr. Inputs
DR2TABLE 3D ToolComp software option: Enter the name of the
compensation value table from which the TNC is to take the
angle-dependent delta radius values DR2
Input range: Max. 16 characters without file extension
LAST_USE Date and time at which the TNC inserted the tool for the last time
via TOOL CALL.
Input range: 16 characters max., format internally specified: Date
= yyyy.mm.dd, time = hh.mm
HEIDENHAIN iTNC 530
Dialog
Compensation-value table?
Date/time of last tool call?
173