HEIDENHAIN iTNC 530 User Manual page 624

Global Program Settings software option
Function for superimposing
coordinate transformations in
the Program Run modes
Adaptive Feed Control software option (AFC)
Function for adaptive feed-
rate control for optimizing the
machining conditions during
series production
KinematicsOpt software option
Touch-probe cycles for
automatic testing and
optimization of the machine
kinematics
3D-ToolComp software option
3-D tool radius compensation
depending on the tool's
contact angle
Extended Tool Management software option
Tool management that can be
changed by the machine
manufacturer using Python
scripts.
Interpolation Turning software option
Interpolation turning
CAD Viewer software option
Opening of 3-D models on the
NC control.
624
Swapping axes
Superimposed datum shift
Superimposed mirroring
Axis locking
Handwheel superimposition
Superimposed basic rotation and datum-based rotation
Feed rate factor
Recording the actual spindle power by means of a teach-in cut
Defining the limits of automatic feed rate control
Fully automatic feed control during program run
Backup/restore active kinematics
Test active kinematics
Optimize active kinematics
Compensate the delta radius of the tool depending on the tool's contact angle at the
workpiece
Prerequisite: LN blocks
Compensation values can be defined in a separate table
Mixed display of data from tool and pocket tables
Form-based editing of tool data
Tool usage and sequence list: component location diagram
Finishing of rotation-symmetrical shoulders through interpolation of the spindle with
the axes of the working plane
Opening of IGES files
Opening of STEP files
Tables and Overviews