HEIDENHAIN iTNC 530 User Manual page 365

Loading fixtures under program control
You can also activate and deactivate saved fixtures under program
control. Proceed as follows:
U Show the soft-key row with special functions.
U Select PROGRAM SPECIFICATIONS group.
U Scroll through the soft-key row
U
Specify the path and file name of the store fixture and
confirm your entry with ENT
Stored fixtures are by default in the
TNC:\system\Fixture\Archive directory.
Make sure that the fixture to be loaded has also been
saved with the active kinematics.
Make sure that no other chucking equipment is active
during automatic activation of a fixture. If necessary, make
prior use of the FIXTURE SELECTION RESET function.
You can also activate fixtures via the pallet tables in the
FIXTURE column.
Deactivating fixtures under program control
You can deactivate active fixtures under program control. Proceed as
follows:
U Show the soft-key row with special functions
U Select PROGRAM SPECIFICATIONS group.
U
Scroll through the soft-key row
U Select the reset function and confirm with the END
key.
HEIDENHAIN iTNC 530 365