HEIDENHAIN iTNC 530 User Manual page 17

Improvements to the DXF converter:
Contours can now also be extracted from .H files (see "Data
transfer from plain-language programs" on page 254)
Preselected contours can now also be selected in the tree
structure (see "Selecting and saving a contour" on page 244)
A snap function facilitates contour selection
Extended status display (see "Basic settings" on page 240)
Adjustable background color (see "Basic settings" on page 240)
Display can be changed between 2-D and 3-D (see "Basic
settings" on page 240)
Improvements to the global program settings (GS):
All the form data can now be set and reset under program control
(see "Technical prerequisites" on page 371)
Handwheel superimposition value VT can be reset when tool is
changed (see "Virtual axis VT" on page 379)
If the Swapping Axes function is active, it is now permitted to
position to machine-based positions on the axes that have not
been swapped
Improvements to the tool table TOOL.T
Using the FIND ACTIVE TOOL NAMES soft key you can check
whether identical tool names are defined in the tool table (see
"Editing tool tables" page 177 ff)
The input range of the delta values DL, DR and DR2 have been
increased to 999.9999 mm (see "Tool table: Standard tool data"
page 170 ff)
The following additional functions are now available in the expanded
tool management (see "Tool management (software option)" on
page 193):
Importing of tool data in CSV format (see "Import tool data" on
page 198)
Exporting of tool data in CSV format (see "Export the tool data"
on page 199)
Marking and deleting of selectable tool data (see "Delete marked
tool data" on page 200)
Inserting of tool indices (see "Operating the tool management"
on page 195)
HEIDENHAIN iTNC 530 17