HEIDENHAIN iTNC 530 User Manual page 605

TNC displays, TNC editor
Configure tool tables
Configure pocket
tables
Index tool numbers in
order to be able to
assign different
compensation data to
each tool number
Configuration of tool
table and pocket table
HEIDENHAIN iTNC 530
MP7260
Inactive: 0
Number of tools generated by the TNC when a new tool table is opened: 1 to 254
If you require more than 254 tools, you can expand the tool table with the function APPEND N
LINES see "Tool Data", page 168
MP7261.0 (magazine 1)
MP7261.1 (magazine 2)
MP7261.2 (magazine 3)
MP7261.3 (magazine 4)
MP7261.4 (magazine 5)
MP7261.5 (magazine 6)
MP7261.6 (magazine 7)
MP7261.7 (magazine 8)
Inactive: 0
Number of pockets in the tool magazine: 1 to 9999
If the value 0 is entered in MP7261.1 through MP7261.7, the TNC uses only one tool magazine.
MP7262
Do not index: 0
Number of permissible indices: 1 to 9
MP7263
Configuration settings for tool table and pocket table: %0000
Show the POCKET TABLE soft key in the tool table: Bit 0 = 0
Do not show the POCKET TABLE soft key in the tool table: Bit 0 = 1
External data transmission: Only transmit displayed columns: Bit 1 = 0
External data transmission: Transmit all columns: Bit 1 = 1
Show the EDIT ON/OFF soft key in the pocket table: Bit 2 = 0
Do not show the EDIT ON/OFF soft key in the pocket table: Bit 2 = 1
RESET COLUMN T and RESET POCKET TABLE soft keys active: Bit 3 = 0
RESET COLUMN T and RESET POCKET TABLE soft keys not active: Bit 3 = 1
Do not allow the deletion of tools if they are contained in the pocket table: Bit 4 = 0
Allow the deletion of tools if they are contained in the pocket table, deletion must be confirmed
by the user: Bit 4 = 1
Deletion of tools contained in the pocket table is possible with confirmation: Bit 5 = 0
Deletion of tools contained in the pocket table is possible without confirmation: Bit 5 = 1
Delete indexed tools without confirmation: Bit 6 = 0
Delete indexed tools with confirmation: Bit 6 = 1
605