Turn-Signals Lever - Mitsubishi L200 Owner's Manual

Switch position 0- Driver only
Switch position 3- Driver + Full luggage load-
ing
{Vehicles with heavy duty
suspension}
Switch position 4- Driver + Full luggage load-
ing
{Vehicles without heavy du-
ty suspension}
Double cab
Vehicle condi-
tion
"2" or "3" or
Switch position "0"
"4"
●: 1 person
: Full luggage loading
Switch position 0- Driver only
Switch position 2- Driver + Full luggage load-
ing
{Vehicles with heavy duty
suspension for Russia, Ka-
zakhstan and Ukraine}
Switch position 3- Driver + Full luggage load-
ing
{Vehicles with heavy duty
suspension except for Rus-
sia, Kazakhstan and Uk-
raine}
{Vehicles without heavy du-
ty suspension for Russia,
Kazakhstan and Ukraine}
Switch position 4- Driver + Full luggage load-
ing
{Vehicles without heavy du-
ty suspension except for
Russia, Kazakhstan and Uk-
raine}
OCRE12E1
Instruments and controls

Turn-signals lever

E00506501273
The turn-signal lamps flash when the lever is oper-
ated (with the ignition switch in the "ON" posi-
tion). At the same time, the turn-signal indication
lamps flash.
1- Turn-signals
When making a normal turn, use position
(1). The lever will return automatically when
cornering is completed.
There are times when the lever will not re-
turn after cornering. This occurs when the
steering wheel is turned only slightly.
In such cases, return the lever by hand.
2- Lane-change signals
When changing lanes, use position (2). It
will return to the neutral position when re-
leased.
NOTE
l If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
3
3-33