Mitsubishi L200 Owner's Manual page 75

Seat and seat belts
The airbags will operate only when the ignition
switch is in the "ON" or "START" position.
When the airbag control unit detect an impact of suf-
ficient frontal or side force, it sends an ignition sig-
nal to the airbag modules to ignite materials in the
inflator and generate gas and inflate the airbags.
The airbags deployment produces a sudden, loud
noise, and releases some smoke and powder, but
these conditions are not injurious, and do not indi-
cate a fire in the vehicle. People with respiratory
problems may feel some temporary irritation from
chemicals used to produce the deployment; open
2
the windows after airbag deployment, if safe to do
so.
The airbags deflate very rapidly after deployment,
so there is little danger of obscured vision.
The time required from the sensors detecting an im-
pact to deflation of the airbags after deployment is
shorter than a blink of an eye.
CAUTION
l Airbags inflate at an extremely rapid
speed. In certain situations, contact with
inflating airbags can result in abrasions,
light cuts, bruises, and the like.
Front passenger's airbag ON-OFF
switch
The front passenger's airbag ON-OFF switch can
be used to disable the front passenger's airbag. If
you have a rearward facing child restraint system
that cannot be fitted to any seat other than the front
passenger seat, be sure to turn OFF the front passen-
ger's airbag ON-OFF switch before using it. (Refer
to "To turn an airbag off" on page 2-30.)
2-30
The front passenger's airbag ON-OFF switch is lo-
cated in the glove box.
WARNING
l To reduce risk of serious or fatal injury:
• Always remove the key from the igni-
tion switch before operating a front
passenger's airbag ON-OFF switch.
Failure to do so could adversely affect
the airbag performance.
• Wait at least 60 seconds to operate the
front passenger's airbag ON-OFF
switch after turning the ignition
switch from "ON"
"LOCK" position.
The SRS airbag system is designed to
retain enough voltage to deploy the air-
E00410100184
bag.
OCRE12E1
WARNING
• Always remove the key from the front
passenger's airbag ON-OFF switch af-
ter operating that switch. Failure to
do so could lead to improper position
of the front passenger's airbag ON-
OFF switch.
To turn an airbag off
To turn an airbag off, follow these steps:
1. Insert the key into the key opening of the ap-
propriate front passenger's airbag ON-OFF
switch, and turn that airbag ON-OFF switch
to the "OFF" position.
2. Remove the key from the key opening of the
front passenger's airbag ON-OFF switch.
3. Insert the key into the ignition switch, and
turn the ignition to the "ON" position.
position to
The front passenger's airbag OFF indication lamp
will stay on to show that the front passenger's air-
bag is not operational. ("Front passenger's airbag
OFF indication lamp" on page 2-31)
E00410600219