Mitsubishi L200 Owner's Manual page 101

Instruments and controls
NOTE
l
The average speed can be reset separately for
the auto reset mode and for the manual reset
mode.
l When you turn the ignition switch to the
"ON" position about 4 hours (or more) after
turning it from the "ON" position to the
"ACC" or "LOCK" position in the auto reset
mode, the average speed indication will auto-
matically be reset.
Outside temperature
The outside temperature is graphed every 5 mi-
nutes and the data for up to 4 hours are shown in
3
(A). The current outside temperature is shown in (B).
3-16
Resetting the outside temperatur
Press the "RESET" function button to reset the
graph of the outside temperature.
E00518500097
NOTE
l Depending on factors such as the driving con-
ditions, the displayed temperature may vary
from the actual outside temperature.
l It is possible to set the display unit to °C or °F.
Refer to "User customization" on page 3-24.
Frozen road warning
This shows the temperature outside the vehicle.
OCRE12E1
When the outside air temperature drops below
about 3 °C (37 °F), the alarm sounds and the out-
side air temperature warning symbol (A) flashes
for about 10 seconds.
CAUTION
l
There is a danger the road might be icy,
even when this symbol is not flashing, so
please take care when driving.
Altimeter
E00518600069
The current elevation in units of 100 m (400 ft) is
shown in (A). The elevation is graphed every
5 minutes and the data for up to 4 hours are shown
in (B).